Béton mural Marius Aurenti - finishing plaster for interior walls
Dress your walls in concrete
Decorative, original and durable, wall-mounted concrete is a specific form of waxed concrete for interior wall decoration (in a rooma exhibitiona kitchen).
Made up of cementsof sands and mineral pigmentswall concrete can be fitted with various types of finishing products (glazes/varnishes) depending on use.
Wall concrete is a different material from waxed concrete "Classic" (which is mainly used for making soils). The wall-mounted version is actually a finishing coatwhich has the property of being workable on vast surfaces.
Wall-mounted concrete also performs well cheaper since it can be placed in fine layer on a primary before applying a protective coat, making it a clear economic advantage.
Wall-mounted concrete is generally applied in a single operation. millimeter layerover a existing support These may include plasterboard or breeze blocka cement or even tiles. In all cases, the substrate must be carefully prepared to ensure even results.
And if you're wondering whether you can make a whole concrete wall pieceincluding the ceiling, the answer is yes!
The Marius Aurenti range of waxed concrete walls
With its deep matte finish and natural colorsWall concrete is a very contemporary material for dressing up a living room or bedroom, or turning a store into a showcase for your products, by responding to other materials - wood, marble, glass, metal, ceramics, earthenware... - and adding a mineral decorative touch.
Whether textured or smooth, wall-mounted concrete gives free rein to the craftsman's creativity in the service of design: new or weathered, wall-mounted concrete is both unique and multi-faceted.
Wall-mounted concrete
Colored through and through, it offers a wide variety of colors and finishes to suit any decorating style: for example, a light-gray textured concrete wall with an industrial look, or a smooth concrete wall in a pastel pink or terracotta color, recalling the warmth and authenticity of the earth.
Classic" wall concrete
Visit Classic" wall concrete offers a smoother, velvety-soft finish, fine and sensual to the touch, with a cloudy, patinated, chic look.
Texture" wall concrete
Visit Texture" wall concrete offers a finish similar to that of traditional roughcast concrete: irregular, full of asperities and small cavities...
Wall concrete colors and varnishes
Marius Aurenti wall concrete is available in the 71 colors of the Iris color chart.
He protects himself with IF3 MA's wall varnish or fixative Marius Aurenti's high-performance matte, silk matte and gloss finishes for high-traffic areas.
It's a economical material ideal for very large commercial space developments and features a long open time for maximum continuity of application.
Full details in the technical data sheets.
Order your samples and color charts on the Matériauthèque.
Wall concrete in the home
Mural concrete on a bedroom or living room wall
A trendy, modern material, wall-mounted concrete adds a touch of elegance and sophistication to your interior walls in living rooms and even in your home. bedroom and your exhibition.
Durable, wall-mounted concrete proves easy to maintain and cleanThis makes it a perfect choice for the walls of your living room or bedroom.
Installing waxed concrete on a plasterboard wall
You can easily apply waxed concrete on a plasterboard wall (also known as plasterboard, BA10, BA13, BA15, BA18, BA25, etc).
Plasterboard is a surface which has the advantage of being perfectly planebut with the disadvantage that seals interrupt this surface and can cause reliefs or differences in appearance during drying.
In fact, the layer of waxed or mural concrete will have a millimetric thickness any underlying relief, any difference inmoisture absorption (especially at joints between plates) may be reflected on the surface.
To smooth out the joints, we lay flatness strips or, preferably, a full plasterto fill imperfections and homogenize the surface. This coating is then very lightly sanded, before being coated with a white wall primerthen wall concrete or lime.
Béton 71 colors - Marius Aurenti
Technical data sheets (PDF version)
Technical data sheets (web version)
Issue of 20/09/2022
AREAS OF USE
Decorative coating for interior walls based on cement and mineral pigments
COMPOSITION
Cementitious plaster Component A: paste Component B: powder
+ Blush Concentré Couleur Minérale
PROPERTIES
Deep matte, rough concrete appearance Easy application and long open time
PACKAGING
7.5 kg kit (5 kg component A + 2.5 kg component B) + 1 1.2 kg Mineral Color Blush Concentrate for an average surface area of 9 m2
15 kg kit (10 kg component A + 5 kg component B) + 2 x 1.2 kg Blush Concentré Couleur Minérale for an average surface area of 17.5 m2
CONSUMPTION
1 kg /m² for 2 coats
Implementation
SUBSTRATE AND SUBSTRATE PREPARATION
This coating is reserved exclusively for interior walls outside splash zones.
Gypsum and plasterboard, cement, aerated concrete, paint and adherent plaster.
Substrates must be mechanically sanded if necessary, sound, dry and clean (notably free of greasy stains, dust and any loose parts).
Substrates are primed with Marius Aurenti Wall Primer to obtain a mechanical hold and block the base.
Structured and/or jointed substrates (plaster, brick, breeze block, etc.) are prepared with a levelling compound to avoid the appearance of spectra, then with Marius Aurenti Wall Primer.
CONDITIONS OF APPLICATION
| AIR AND SUBSTRATE TEMPERATURE | >5°C and 15°C and <20°C) |
| RELATIVE AIR HUMIDITY | <80% |
| RELATIVE HUMIDITY OF THE SUBSTRATE | 4% maximum |
| OPEN APPLICATION TIME | 1h30 at 20°C |
APPLICATION EQUIPMENT
Parfaitliss 35 cm float or 200 mm stainless steel float and American knife.
PREPARATION AND APPLICATION OF WALL CONCRETE
Step 1: Component B + Blush
- Roll the bucket of component B on the ground to aerate and soften the material before mixing.
- Open the component B bucket and make a slight indentation in the center of the base.
- Shake the BLUSH concentrate jar, open it and pour the entire contents into the hollow of the base.
- Block the bucket with your feet, and mix the base and concentrate dry, at low speed (like a Collomix double turbine mixer). Be careful not to spill any out of the bucket. Accelerate gradually.
- Continue mixing, using straight and slanted vertical and lateral movements to perfectly blend the contents. Pay particular attention to the edges and bottom of the jar, so as not to miss those corners that are most difficult to mix. When mixing for the first time, we advise you to pour the mixed contents into a bucket of the same size, so as to visually check the quality of the mix and repeat it if necessary. Mixing time should not be less than 1 minute.
Stage 2: Component A + mixture
- Homogenize component B well, then introduce the mixture (component A + concentrate).
- Mix until smooth and lump-free.
Note: the dry storage life of the dry mixture (component B+ BLUSH concentrate) is not impaired if the buckets are closed and stored under the recommended normal conditions.
Apply 2 thin coats, playing with effects with the application tools to give a random look to the decor. Note that when you apply the second layer, effects such as color are reinforced if you press hard on the tool. The wall varnish will not only achieve the target color, but also protect the rendering.
Rough finish: simply allow to dry. The shade will be light.
Velvety finish: Rub the rendering with a slightly damp cement sponge to bring out the laitance. The aim of this finish is to achieve a very homogeneous overall appearance with few mottles.
Warning: the tint will be lightened by the use of water.
DRYING TIME AT 20°C AND 60% RELATIVE HUMIDITY
| BETWEEN 2 COATS | 4 hours |
| BEFORE WAXOR VARNISH | 3 days |
TOOL CLEANING
Equipment should be cleaned with hot water after use.
Technical specifications and performance
PRODUCT APPEARANCE
Component A: paste
Component B: white powder
Blush: tinted powder made from mineral pigments
DENSITY A+B (AT 20°C)
Component A: approx. 1.4
Component B: 2 approx.
Blush: depending on color
STORAGE AND SAFETY
1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +5° and 35°C.
For further safety information, please consult the Safety Data Sheet.
Warning
Designed, developed and manufactured in France. All data presented in this Technical Data Sheet are provided for information purposes only and do not engage our responsibility. They do not in any way imply a warranty. Testing is necessary. This Data Sheet is subject to change. Please ensure that it is the latest edition. This data sheet cancels and replaces all previous versions. Furthermore, as the application and conditions of use are not under our control, we decline all responsibility. For further information on precautions for use and safety instructions, please consult our Marius Aurenti teams.
Issue of 20/09/2022
Presentation
AREAS OF USE
Decorative coating of interior walls for a rough concrete look with small cavities
COMPOSITION
Cement-based plaster
Component A: paste
Component B: powder
+ Blush Concentré Couleur Minérale
PROPERTIES
Easy, one-coat application, deep matte, raw appearance, protection possible for use in public areas
PACKAGING
7.5 kg kit (5 kg component A + 2.5 kg component B) + 1 1.2 kg Mineral Color Blush Concentrate for an average surface area of 5.5 m2
15 kg kit (10 kg component A + 5 kg component B) + 2 x 1.2 kg Blush Concentré Couleur Minérale for an average surface area of 11 m2
CONSUMPTION
1.6 kg /m² in 1 coat
Implementation
SUBSTRATE AND SUBSTRATE PREPARATION
This coating is reserved exclusively for interior walls outside splash zones.
Gypsum and plasterboard, cement, aerated concrete, paint and adherent plaster.
Substrates must be mechanically sanded if necessary, sound, dry and clean (notably free of greasy stains, dust and any loose parts).
Substrates are primed with Marius Aurenti Wall Primer to obtain a mechanical hold and block the base.
Structured and/or jointed substrates (plaster, brick, breeze block, etc.) are prepared with a levelling compound to avoid the appearance of spectra, then with Marius Aurenti Wall Primer.
CONDITIONS OF APPLICATION
| AIR AND SUBSTRATE TEMPERATURE | >5°C and 15°C and <20°C) |
| RELATIVE AIR HUMIDITY | <80% |
| RELATIVE HUMIDITY OF THE SUBSTRATE | 4% maximum |
| OPEN APPLICATION TIME | 1h30 at 20°C |
APPLICATION EQUIPMENT
Parfaitliss 35 cm float or 200 mm stainless steel float and American knife.
MIX PREPARATION
Step 1: Component B + Blush
- Roll the bucket of component B on the ground to aerate and soften the material before mixing.
- Open the component B bucket and make a slight indentation in the center of the base.
- Shake the BLUSH concentrate jar, open it and pour the entire contents into the hollow of the base.
- Block the bucket with your feet, and mix the base and concentrate dry, at low speed (like a Collomix double turbine mixer). Be careful not to spill any out of the bucket. Accelerate gradually.
- Continue mixing, using straight and slanted vertical and lateral movements to perfectly blend the contents. Pay particular attention to the edges and bottom of the jar, so as not to miss those corners that are most difficult to mix. When mixing for the first time, we advise you to pour the mixed contents into a bucket of the same size, so as to visually check the quality of the mix and repeat it if necessary. Mixing time should not be less than 1 minute.
Stage 2: Component A + mixture
- Homogenize component B well, then introduce the mixture (component A + concentrate).
- Mix until smooth and lump-free.
Note: the dry storage life of the dry mixture (component B+ BLUSH concentrate) is not impaired if the buckets are closed and stored under the recommended normal conditions.
APPLICATION
Apply in 1 thick coat without trying to achieve a decorative effect. Allow to dry for at least 12 hours (at 20°C and 60% HR).
The aim is to obtain a mass layer which can then be completely sanded with 40-grit sandpaper. When sanding, take care not to expose the substrate.
Decoration takes place during sanding.
After sanding, you can apply a coat of wood stain in the same color as the concrete wall, adjusting the dilution to achieve the desired decorative effect.
The glaze is applied with a sheepskin glove, playing with irregular, dabbing and wiping effects.
Any excess can be wiped off with a clean cloth, for an aesthetically pleasing visual effect.
The concrete surface can be left rough or protected with a coat of wall protection varnish for a matt effect, or two coats for a silky matt effect. Allow to dry for at least 4 hours (at 20°C and 60% HR).
You can repeat the application of woodstain after the first coat of varnish to reveal the material effects. Note that you can also change the color and play with the color of the substrate and the color of the stain. As wall concrete is a product with a wide range of possible effects and appearances, we advise you to carry out preliminary tests to validate the aesthetic result desired by the customer.
TOOL CLEANING
Clean equipment with water and abrasive pad after use.
Technical specifications and performance 3
PRODUCT APPEARANCE
Component A: paste Component B: white powder
Blush: tinted powder made from mineral pigments
DENSITY A+B (AT 20°C)
Component A: approx. 1.4 Component B: approx. 2 Blush: depending on color
STORAGE AND SAFETY
1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +5° and 35°C.
For further safety information, please consult the Safety Data Sheet.
Warning
Designed, developed and manufactured in France. All data presented in this Technical Data Sheet are provided for information purposes only and do not engage our responsibility. They do not in any way imply a warranty. Testing is necessary. This Data Sheet is subject to change. Please ensure that it is the latest edition. This data sheet cancels and replaces all previous versions. Furthermore, as the application and conditions of use are not under our control, we decline all responsibility. For further information on precautions for use and safety instructions, please consult our Marius Aurenti teams.
