Concrete, lime or marmorino wax, for floors and walls

HIGH RESISTANCE WAX Finish

Edition of 01/03/2023

Presentation

AREAS OF USE

The product is used for interior treatment of porous mineral materials for surface hardening and protection.

COMPOSITION

High-resistance emulsion, available in 3 grades: gloss, satin or matte.

In addition to the topcoat, it protects surfaces against micro-scratches and reinforces them against punching.

Properties

High strength, fast drying, slip resistance, easy to apply and maintain, good UV resistance, good traffic resistance.

Packaging

1 L and 5 L

Implementation

SUBSTRATE AND SUBSTRATE PREPARATION

The substrate must be clean and dry. Old protective waxes should be removed. Two types of application are possible: using an applicator broom or, ideally, a single-brush machine.

CONSUMPTION

20 to 30 m2/L/coat

METHOD OF APPLICATION

Broom application

Apply a thin, even coat of high-strength wax. Apply in overlapping strips while the wax is still wet. Allow to dry thoroughly (approx. 30 minutes). Apply second and subsequent coats, taking care to overlap (2 to 3 coats are recommended).

Single-brush renewal

The product is sprayed on and applied with a single-brush machine fitted with a white pad. Renewal of the wax will depend on the intensity of use.

Maintenance: wash the floor regularly with a neutral detergent from the Ma's range.

Important: do not dilute or mix with other products. Do not apply over any other type of wax. Do not use outdoors or in damp areas. Do not apply at temperatures below 5°C or above 35°C.

TOOL CLEANING

Equipment should be cleaned with water after use.

Technical specifications and performance 4

PRODUCT APPEARANCE

White opaque liquid

APPEARANCE OF DRY FILM

Gloss / satin / matt depending on reference

DENSITY

1.03.

PH

8,4 à 9,2

STORAGE AND SAFETY

1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +5° and 35°C.

For further safety information, please consult the Safety Data Sheet.

Wall wax paste, finishing

Technical data

Edition of 02/12/19

Presentation

Ready-to-use, creamy wall wax paste for decorating interior walls, based on lime paste.

Implementation

The surface must be perfectly clean and dry.

Apply 1 to 2 coats with a sheepskin glove, depending on the desired effect. Apply in overlapping strips while still wet.

Wait for the wax to dry (4 to 5 hours at 20°C), before applying the next coat.

Wall wax paste can alter colors, so a test run is always recommended.

Important: Do not dilute or mix with other products. Do not apply over any other type of wax. Do not use outdoors or in damp areas. Do not apply if temperature is below 5°C or above 35°C.

Features

Product appearance

pasty, cream-colored with iridescent highlights

Dry film appearance

silky matte with effects

Packaging

650 g or 3.5 kg

Precautions for use

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children. Use gloves. Keep in original packaging and store in a dry place at a temperature between 5 and 30'C.

All information presented in this data sheet is provided for information purposes only and does not engage our responsibility. Testing is necessary.

Edition of 01/03/2023

Presentation

AREAS OF USE

Wall wax for Lime paste or Marmorino.

COMPOSITION

Mixture of synthetic resins and wax in emulsion.

PROPERTIES

Single-component, ready-to-use, waterproofing.

PACKAGING

1L - 5L

Implementation

SUBSTRATE AND SUBSTRATE PREPARATION

The substrate must be sound, dry, cohesive and clean (free of dust, dirt, oil, etc.).

APPLICATION EQUIPMENT

Smoother or 12mm roller.

CONDITIONS OF APPLICATION

TEMPERATURE: >5°C and 15°C and <20°C)

RELATIVE HUMIDITY: <60%

IMPLEMENTATION

When the lime is completely dry and has completed its carbonation process, apply a coat of wax using a smoother or roller.

Always apply from bottom to top with the smoothing tool. Do not over-thicken wax to avoid white areas.

Once the surface has begun to dry, smooth it out for greater effect.

Important: Do not dilute or mix with other products. Do not apply over any other type of wax.

CONSUMPTION

70 - 100mL /m²

TOOL CLEANING

Equipment should be cleaned with hot water after use.

Technical specifications and performance

VISCOSITY

40 cPs

SPOTLIGHT

> 60°C

PRODUCT APPEARANCE

White creamy fluid

APPLIED, DRY APPEARANCE

Mat

SPECULAR GLOSS AT 60°.

Mat: approx. 3UB

These data are indicative and may vary according to application conditions.

DENSITY (AT 20°C)

0,95

STORAGE AND SAFETY

1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +5° and 35°C.

For further safety information, please consult the Safety Data Sheet.

Warning

Designed, developed and manufactured in France. All data presented in this Technical Data Sheet are provided for information purposes only and do not engage our responsibility. They do not in any way imply a warranty. Testing is necessary. This Data Sheet is subject to change. Please ensure that it is the latest edition. This data sheet cancels and replaces all previous versions. Furthermore, as the application and conditions of use are not under our control, we decline all responsibility. For further information on precautions for use and safety instructions, please consult our Marius Aurenti teams.