\n\t\t\t\t\t\t\t\t\tRequest a free quote
\n\t\t\t\t\t<\/a><\/p>\n
Types of varnish<\/h2>\nEvery type of concrete needs its own varnish: water-based or solvent-based?<\/h3>\n
Each surface and use has its own solution, in keeping with respect for materials and the desire for a mineral, raw aesthetic.<\/p>\n
For micro concrete or panel applications, the water-based range offers excellent performance in areas where there is little demand, while solvent-based varnishes are the ultimate protectors for the most demanding areas.<\/p>\n
A+ rating<\/h3>\n
Marius Aurenti varnishes are A+-rated, recognized by professionals and extremely resistant to chemical or physical aggression, requiring little maintenance.<\/p>\n
![\"A+](\"https:\/\/www.mariusaurenti.com\/wp-content\/uploads\/2023\/05\/emission-dans-lair_Site-300x156.jpg\")
<\/p>\n
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t The varnish range includes :<\/p>\n The application of a varnish requires particular care (temperature and humidity conditions, ventilation, quality of mix, drying time between coats, quantity, tools and user protection).<\/p>\n Consult the technical data sheets for each varnish and ask our teams for advice on the best protection for your project.<\/p>\n Read the technical data sheets carefully and take part in professional training<\/a> courses.<\/p>\n Single-component, waterborne varnish.<\/p>\n Easy to use, it protects walls made with B\u00e9ton Mural Marius Aurenti or B\u00e9ton Cir\u00e9 Classic on walls not exposed to water.<\/p>\n Quick-drying and chemically resistant, it provides good protection when cleaning (washing) decorative walls. Unique silky-matt finish.<\/p>\n Consumption: 75 g\/m\u00b2 in 1 coat, apply 2 coats for extra protection.<\/p>\n Packaging: 1 kg and 5 kg<\/p>\n Water-based protection for floors and walls. It regulates the porosity of micro concrete before applying VISCO N\u00b07 varnish.<\/p>\n Average consumption: 100ml\/m\u00b2 in 2 coats.<\/p>\n Apply with a microfiber roller (10mm)<\/p>\n High-performance impregnation for interior floors and walls in dry and damp areas for residential and commercial use.<\/p>\n Two-component polyurethane varnish.<\/p>\n This fixative acts as a pore filler and finish in a single product.<\/p>\n It allows coats to be applied every 3 hours, for a complete treatment in a single day.<\/p>\n Its matte or silky-matte appearance and properties make it ideal for protecting concrete subjected to intensive use: bathrooms, floors, walls, furniture, kitchens and public areas.<\/p>\n Consumption: 300 g\/m\u00b2 in 3 to 5 coats.<\/p>\n Packaging: 1.1 l and 5.5 l.<\/p>\n Ideal for use on Classic<\/a>, Fluide or Special Terrace<\/a> waxed concretes, this solvent-based impregnation protects outdoor floors.<\/p>\n Its pearlizing effect prevents the penetration of water and greasy products.<\/p>\n It facilitates the maintenance of your floor coverings.<\/p>\n Satin finish.<\/p>\n Consumption: 250 g\/m\u00b2 in two coats.<\/p>\n Packaging: 5 l.<\/p>\n \t\t\t\t\t \t\t\t\t\t\t\t\t\t\t\t\tTechnical data wall protection varnish N\u00b02<\/a><\/p>\n Protecting and decorating interior walls<\/p>\n Single-component, waterborne varnish<\/p>\n Transparent, non-yellowing, good adhesion, quick-drying, odorless.<\/p>\n 1 kg and 5kg<\/p>\n Perfectly consistent, clean and dry concretes and derivatives Sand varnished concretes to 120 grit for refinishing<\/p>\n Indicative data which may vary according to application conditions and the porosity of the substrate. 75 grams per m\u00b2 in 1 coat<\/p>\n No<\/p>\n Lacquer roller. The equipment must be perfectly dry and clean.<\/p>\n Shake well before application.<\/p>\n To avoid roller marks, it is advisable to always work cool in cool.<\/p>\n TEMPERATURE >10\u00b0C and <35\u00b0C (ideal temperature: >15\u00b0C and <20\u00b0C)<\/p>\n RELATIVE HUMIDITY <80%<\/p>\n HUMIDITY OF SUBSTRATE 4% maximum<\/p>\n DRY TO THE TOUCH 30 minutes<\/p>\n RECOVERABLE after a minimum of 4 hours and a maximum of 8 days. Beyond that, light sanding is required<\/p>\n COMMISSIONING WITH PRECAUTIONS 24 hours minimum<\/p>\n DEFINITIVE DURATION 4 days minimum<\/p>\n Equipment should be cleaned with water immediately after use.<\/p>\n Technical specifications and performance<\/p>\n Colorless viscous liquid<\/p>\n Silky matte transparent film<\/p>\n 1<\/p>\n Silky matte: approx. 6 UB<\/p>\n These data are indicative and may vary according to application conditions.<\/p>\n The role of varnish is to avoid and prevent stains on porous materials such as concrete or stone.<\/p>\n Despite the high performance and qualifications of MA’s treatments, these protections are not insensitive to long and repeated exposure, which can damage the material.<\/p>\n Avoid prolonged or permanent contact with aggressive chemicals such as acids, alkalis, vinegar, solvents, bleach, etc.<\/p>\n These varnishes are not recommended for use in contact with hot oils (e.g. kitchen splashbacks).<\/p>\n Wall protection varnish may only be used on walls.<\/p>\n 1 year in original packaging, away from sunlight and frost, in a cool, well-ventilated place. Check the expiry date on the packaging before use.<\/p>\n For further safety information, please consult the Safety Data Sheet. VOC contents are also available in section 15 of the Safety Data Sheet.<\/p>\n \t\t\t\t\t\t\t\t\t\t\t\tBouche Pore n\u00b05 data sheet<\/a><\/p>\n Technical data – MAJ 22\/10\/19<\/p>\n Pore plug n\u00b05<\/p>\n Protecting interior walls and floors<\/p>\n Aqueous phase pore sealers<\/p>\n Transparent, non-yellowing, regulates slightly sandy and very porous bottoms.<\/p>\n Excellent resistance to water and dirt.<\/p>\n 1 L and 5 L<\/p>\n Concrete, mortar, dry mineral coatings<\/p>\n Temperature: 10-30\u00b0C<\/p>\n Relative humidity: <80%<\/p>\n Protect from wind, sun and frost during application and curing.<\/p>\n No dilution required<\/p>\n Microfiber roller, spray gun<\/p>\n Shake before use.<\/p>\n Apply to saturation (generally in 2 coats) in criss-cross passes.<\/p>\n 100g per m\u00b2 in 2 coats<\/p>\n Indicative data to be adapted according to the porosity of the substrate<\/p>\n Bouche-pore n\u00b05 naturally has a slight residual surface tack. Excessive use of pore-filler can accentuate this residual surface tack.<\/p>\n Between coats: approx. 6 hours (depending on the porosity of the substrate)<\/p>\n Completely dry: 24 hours minimum. Do not varnish before 24 hours<\/p>\n Water<\/p>\n Appearance in jar: milky liquid<\/p>\n Finished appearance: transparent, colorless satin film<\/p>\n Density A+B (at 20\u00b0C): 1.0 +\/-0.1<\/p>\n Flash point: NA<\/p>\n Useful life: NA<\/p>\n Other data : –<\/p>\n 1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +5\u00b0 and 35\u00b0C.<\/p>\n Check the expiration date on the packaging before use.<\/p>\n For further safety information, please consult the Safety Data Sheet.<\/p>\n All information contained in this data sheet is provided for information purposes only and does not engage our responsibility. Testing is necessary.<\/p>\n For further information on precautions for use and safety instructions, please refer to the safety data sheet.<\/p>\n \t\t\t\t\t\t\t\t\t\t\t\tTechnical data for IF3 spray varnish<\/a><\/p>\n FIXED IF3 Finish<\/p>\n Edition of 12\/12\/2022<\/p>\n Fixing primer protection for interior micro concrete walls and floors (consult us for exterior applications).<\/p>\n Two-component, solvent-based PU fixative.<\/p>\n Component A: base; Component B: hardener<\/p>\n Silky matte<\/p>\n Finishing product that provides the system with high mechanical strength and chemical resistance.<\/p>\n This product is perfectly suited for use in environments subject to high mechanical and chemical stress (floors, kitchens, bathrooms, etc.).<\/p>\n Its short drying time means that successive coats can be covered very quickly. This makes it ideal for small-scale, in-situ projects, minimizing the need for on-site travel.<\/p>\n 1.1 L and 5.5 L<\/p>\n MA’s waxed concretes, concretes and derivatives that are perfectly consistent, perfectly clean and dry, free of greasy stains. When repairing a varnish or fixative wear layer, sand with 120 grit.<\/p>\n Resin\/hardener mixing ratio: 10\/1<\/p>\n Failure to observe the correct mixing ratio between resin and hardener will alter the product’s performance (chemical and mechanical resistance).<\/p>\n 10 mm microfibre roller, spray gun: 1.6-1.8 mm diameter nozzle.<\/p>\n It is essential to measure ambient and substrate temperatures and relative ambient and substrate humidity before applying the product.<\/p>\n AMBIENT TEMPERATURE 17-25\u00b0C (ideal value: 20 to 25\u00b0C)<\/p>\n SUBSTRATE TEMPERATURE >3\u00b0 from dew point to avoid condensation<\/p>\n PRODUCT TEMPERATURE Ambient temperature 18-25\u00b0C (ideal value: 20 to 25\u00b0C)<\/p>\n HUMIDITY SUPPORT <4% relative humidity<\/p>\n RELATIVE HUMIDITY >40% and <80% (ideal value: 50 to 65%)<\/p>\n Protect from wind, sun and frost during application and setting.<\/p>\n Ventilate the room (provide air circulation) during application and drying to avoid surface defects in the varnish film.<\/p>\n Failure to observe these application conditions may render the chemical reaction of IF3 fixative inactive.<\/p>\n In this case, the chemical and mechanical performance of the fixative is not achieved. Bleaching may also occur.<\/p>\n During the entire varnish application and drying phase, the premises must not be painted.<\/p>\n Application in 4 coats.<\/p>\n Indicative data which may vary according to application conditions and the porosity of the substrate.<\/p>\n Indicative data which may vary according to application conditions and the porosity of the substrate. Minimum: 300 grams per square metre<\/p>\n Applying too thick a coat can cause previous coats of fixative to bubble or even peel off.<\/p>\n DRYING TIME AT 20\u00b0C AND 60% RELATIVE HUMIDITY<\/p>\n OUT OF DUST 30 minutes<\/p>\n DRY TO TOUCH 2 hours<\/p>\n BETWEEN COATS 2 hours minimum, remove previous coat after 48 hours<\/p>\n FULL DRYING 7 days minimum.<\/p>\n Do not lay carpets before 7 days of drying.<\/p>\n At a temperature of 17\u00b0C, drying time is doubled.<\/p>\n To increase recovery time, add 10% of a suitable thinner (consult us).<\/p>\n If other trades are working on the site, we recommend the use of micro-breathable protective tarpaulins such as Landolt’s Floorliner Vapor.<\/p>\n Solvent-based cleaner<\/p>\n Appearance in jar: colorless liquid Applied appearance: silky matte or matte<\/p>\n 0.95<\/p>\n < 21\u00b0C<\/p>\n 1 hour<\/p>\n Despite their apparent fluidity, old mixes are detrimental to the quality of IF3 fixative (adhesion, mechanical and chemical resistance). Never reuse them.<\/p>\n Specular gloss at 60\u00b0: silk matte: approx. 8 UB Matte: approx. 3 to 5 UB<\/p>\n Indicative data which may vary according to application conditions.<\/p>\n The role of fixatives is to avoid and prevent stains on porous materials such as concrete or stone. Despite the high performance and qualifications of MA’s treatments, these protections are not insensitive to long and repeated exposure, which can damage the material.<\/p>\n It is therefore imperative not to leave standing water on fixatives which are not suitable for sealing (e.g. flowerpots, sponges, wet linen…).<\/p>\n Avoid prolonged or permanent contact with aggressive chemicals such as acids, alkalis, vinegar, solvents, bleach, hydroalcoholic gel, etc.<\/p>\n Splashes of hydroalcoholic gel on the fixative surface can cause irreversible damage. Surfaces at risk of exposure must be perfectly protected.<\/p>\n The use of these fixatives is not recommended when in contact with hot oils (e.g. kitchen splashbacks).<\/p>\n The use of a protective mat is necessary when using chairs with castors.<\/p>\n We recommend the use of protective felt under chair legs or furniture.<\/p>\n Follow the instructions in the Marius Aurenti maintenance manual.<\/p>\n 1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +16\u00b0 and 25\u00b0C. Check the expiration date on the packaging before use.<\/p>\n If application is to be carried out in an enclosed area close to dwellings, an air extraction system should be installed to avoid the unpleasant effects of solvent vapors contained in the varnish.<\/p>\n Wear appropriate safety equipment. Refer to safety data sheet. For further safety information, please refer to the Safety Data Sheet. VOC contents are also available in section 15 of the Safety Data Sheet. For further safety information, please consult the Safety Data Sheet.<\/p>\n \t\t\t\t\t\t\t\t\t\t\t\tTechnical leaflet Impregnation Terrasse N\u00b02<\/a><\/p>\n Impregnation Terrace n\u00b02<\/p>\n Protecting concrete floors and exterior walls<\/p>\n Solvent-based acrylic impregnation<\/p>\n Prevents penetration of water and greasy products, pearlescent effect, easy maintenance, colorless, non-yellowing<\/p>\n 5L<\/p>\n Perfectly consistent concretes and derivatives.<\/p>\n Clean raw concrete with MA’s New Screed Acid Cleaner and rinse to neutralize PH. Sand varnished concrete with 120 grit to repair the wear layer.<\/p>\n It is essential to measure ambient and substrate temperatures and relative ambient and substrate humidity before applying the product.<\/p>\n Ambient temperature: 5 – 30\u00b0c<\/p>\n Substrate temperature: >3\u00b0 from dew point to avoid condensation<\/p>\n Relative humidity: <80%<\/p>\n Substrate humidity: <4%. A damp substrate or the presence of moisture may cause the solvent-based oil-repellent impregnation to bleach.<\/p>\n Protect from rain, wind, sun, frost, flora and fauna during application and setting.<\/p>\n Failure to comply with these application conditions may render the chemical reaction of Terrasse n\u00b02 impregnation inactive. In this case, the chemical and mechanical performance of the impregnation is not achieved. Bleaching may also occur.<\/p>\n Short-haired roller, brush.<\/p>\n Homogenize Terrasse n\u00b02 impregnation before use.<\/p>\n Apply in 2 coats. Excessive thickness can lead to defects in appearance.<\/p>\n 200 to 300g per m\u00b2 for 2 coats, depending on the porosity of the substrate.<\/p>\n Indicative data which may vary according to application conditions and the porosity of the substrate.<\/p>\n Excessive thickness of Terrasse n\u00b02 impregnation (too thick a layer) can lead to bubbling or even delamination of previous impregnation layers.<\/p>\n Drying time at 20\u00b0C and 60% relative humidity:<\/p>\n Dust-free: 30 minutes<\/p>\n Between coats: 5 hours minimum, remove previous coat after 24 hours<\/p>\n Completely dry: 24 hours minimum.<\/p>\n If other trades are working on the site, we recommend the use of micro-breathable protective tarpaulins such as Landolt’s Floorliner Vapor.<\/p>\n Epoxy and polyurethane cleaner<\/p>\n Appearance in jar: Clear liquid<\/p>\n Finished appearance: Transparent, colorless film, silky matte to satin finish. Please note that the original shade can be enhanced by one or two shades.<\/p>\n 0,9<\/p>\n The role of Terrasse n\u00b02 impregnation is to avoid and prevent stains on porous materials such as concrete or stone. Despite the high performance and qualifications of MA’s treatments, these protections are not insensitive to long and repeated exposure, which can damage the material.<\/p>\n It is therefore imperative not to leave any standing water on the covers, which are not suitable for sealing purposes (e.g. flowerpots, sponges, wet cloths, etc.).<\/p>\n Avoid prolonged or permanent contact with aggressive chemicals such as acids, bases, vinegar, solvents, bleach, hydroalcoholic gel, etc.<\/p>\n Splashes of hydroalcoholic gel on the impregnation surface can cause irreversible damage. Surfaces at risk of exposure must be perfectly protected.<\/p>\n With this tutorial, discover the best techniques for applying Marius Aurenti varnish, for optimum protection and easy maintenance.<\/p>\n https:\/\/www.youtube.com\/watch?v=3gs_vn1x7fE<\/p>\n The application of a varnish is an important step in the successful creation of micro concrete.<\/p>\n This is what determines the quality of the protection of your micro concrete and facilitates its daily maintenance.<\/p>\n Start by choosing the look of your varnish: most come in matte, silk matte, satin or gloss.<\/p>\n Most of our work is done in silky matte or satin, as this retains a certain depth of material, while giving a pleasing finish to the eye.<\/p>\n Shiny finishes, on the other hand, are rarely used on mineral materials, as they give the surface a somewhat flashy appearance. However, gloss goes well with black, for example, or with red, to give a lacquered effect.<\/p>\n Finally, matte varnish gives the materials depth and a very contemporary raw look. It is particularly well-suited to walls to give them depth in relation to the light.<\/p>\n For wall protection, we recommend our single-component acrylic wall varnish. Simple and effective, apply with a roller and criss-cross strokes. It provides sufficient protection against accidental splashes and allows the wall to be washed for regular cleaning.<\/p>\n In high-traffic areas, two-component HR1 and n\u00b07 Visco polyurethane-based varnishes are the best choice. They include a base and a hardener.<\/p>\n Marius Aurenti develops water-based varnishes, but for high-traffic areas such as kitchens, bathrooms and high-traffic floors, professionals use our range of solvent-based varnishes.<\/p>\n These increase mechanical strength and resistance to chemical agents, and guarantee easy cleaning and longer service life.<\/p>\n Once you’ve decided on the effect – matt, satin or gloss – and the type of varnish to use, you need to calculate the quantity of varnish you’ll need for your work. If, for example, you need to cover a 50 m\u00b2 floor and the varnish is quoted at 250 g per square metre, you’ll need 12.5 kg of varnish. It’s important to use up all 12.5 kg of varnish, adjusting the number of coats you repeat until the entire quantity is consumed. Quantity, and quantity alone, determines the quality of protection!<\/p>\n As for application, avoid very thick coats. They won’t stretch very well and won’t form the film needed to protect your work.<\/p>\n It is therefore preferable to apply more thin coats than fewer thick ones. In addition, each varnish requires a specific drying time between coats. This time must be respected so that the new layer does not melt or technically soak the previous layer by depositing it too hastily.<\/p>\n On a building site, the temperature and humidity of the air and substrate are crucial. In fact, if you apply your varnish to concrete that’s still damp, its set will mix with the water and, once dry, the film won’t play its role in protecting against stains. It is therefore important to allow the concrete to dry, ideally 48 hours at 20\u00b0 C, before applying the varnish.<\/p>\n Temperature also influences humidity, as it determines the speed at which the varnish sets. Ideally, you should work two days after applying your concrete, at a temperature of 20\u00b0 and 65% humidity. If these conditions are not met on your site, you can use a heating or dehumidification system if necessary.<\/p>\n In the case of two-component varnishes, component A and component B must be mixed as indicated on the packaging. A scale is therefore necessary to prepare your mixture for a single layer. Note that solvent-based varnishes require a thin first coat with a longer drying time, usually overnight, to allow the concrete pores to be deeply sealed. Water-based polyurethane varnishes may require prior application of a pore filler.<\/p>\n Repeat for each coat of varnish. If you have any varnish left over after applying one coat, do not save it for the next coat, as it will have lost its stain-resistant quality.<\/p>\n When using solvent-based varnishes, make sure you have the necessary protective equipment and a special mask.<\/p>\n Two-component varnishes, such as HR1 or n\u00b07 Visco, require the hardener to be thoroughly mixed with the base to ensure correct reaction. Leave to stand for five minutes before application and stir again before starting.<\/p>\n Before applying the first coat, it’s important to remove dust from the substrate with a vacuum cleaner, and to ensure that your worksite is dust-free between coats.<\/p>\n Start by applying to edges and corners using a brush or small microfiber roller. Then, for larger surfaces, use a 10 mm microfiber roller, criss-crossing the coats. A simple swipe with your hand will allow you to feel the roughness of the dust, which can be lightly sanded with 240 grit paper between coats if necessary.<\/p>\n Once the varnish is finished, the surface dries very quickly. It usually allows you to walk around with protective footwear on the next day, but it won’t have finished drying out yet.<\/p>\n Traffic is possible after three days, and a varnished surface can be wet-coated after 7 days at 20\u00b0 temperature and 65% humidity.<\/p>\n Marius Aurenti varnishes are recognized by professionals, and have been used for over 35 years in public buildings, residential settings and intensive-use establishments.<\/p>\n They are extremely durable and require very little renovation. A good regular cleaning system will ensure their longevity, and they can also be polished with sanding tools in the event of micro-scratches.<\/p>\n If, after several years, you wish to renovate your surface, you can do so by lightly sanding it with 120 grit after stripping, and renewing one to three coats of varnish if necessary. <\/p>\n One last point: check the freshness of the varnishes and their storage conditions, to avoid freezing and extreme heat.<\/p>\n Good application, your job is almost done!<\/p>\n","protected":false},"excerpt":{"rendered":" Waterborne or solvent-based varnishes and impregnations protect concrete floors and walls, and act as pore fillers and finishes.<\/p>\n","protected":false},"author":2,"featured_media":9001688,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[2912],"tags":[],"class_list":["post-41762","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-materials"],"acf":[],"yoast_head":"\n![\"vernis](\"https:\/\/www.mariusaurenti.com\/wp-content\/uploads\/2023\/05\/chantier106-e1732805787923.jpg\" "\\"Application")
\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/p>\n![\"Effet](\"https:\/\/www.mariusaurenti.com\/wp-content\/uploads\/2023\/05\/Effet-impermeabilisant-et-perlant-des-vernis-1024x650.jpg\" "\\"Effet")
The Marius Aurenti varnish range<\/h2>\n
Varnishes and impregnations<\/h3>\n
\n
Varnish application<\/h3>\n
\n\t\t\t\t\t\t\t\t\t\t\t\tWall protection varnish n\u00b02<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\tBouche Pore n\u00b05<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\tVarnish Fixative IF3<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\tImpregnation Terrace<\/a>
\n\t\t\t\t\t<\/h3>\nTechnical data sheets (PDF version)<\/h2>\n
\n\t\t\t\t\t\t\t\t\tTechnical data wall protection varnish N\u00b02
\n\t\t\t\t\t<\/a>
\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\tBouche Pore n\u00b05 data sheet
\n\t\t\t\t\t<\/a>
\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\tTechnical data for IF3 spray varnish
\n\t\t\t\t\t<\/a>
\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\tTechnical leaflet Impregnation Terrasse N\u00b02
\n\t\t\t\t\t<\/a><\/p>\nTechnical data sheets (web version)<\/h2>\n
Presentation<\/h2>\n
AREAS OF USE<\/h3>\n
COMPOSITION<\/h3>\n
PROPERTIES<\/h3>\n
PACKAGING<\/h3>\n
Implementation<\/h2>\n
SUBSTRATE AND SUBSTRATE PREPARATION<\/h3>\n
CONSUMPTION<\/h3>\n
DILUTION<\/h3>\n
APPLICATION EQUIPMENT<\/h3>\n
APPLICATION METHOD<\/h3>\n
CONDITIONS OF APPLICATION<\/h3>\n
DRYING TIME AT 20\u00b0C AND 60% RELATIVE HUMIDITY<\/h3>\n
TOOL CLEANING<\/h3>\n
PRODUCT APPEARANCE<\/h3>\n
FINISHED ASPECT<\/h3>\n
DENSITY (AT 20\u00b0C)<\/h3>\n
SPECULAR GLOSS AT 60\u00b0.<\/h3>\n
PRECAUTIONARY MEASURES<\/h3>\n
STORAGE AND SAFETY<\/h3>\n
Presentation<\/h2>\n
Areas of use<\/h3>\n
Composition<\/h3>\n
Properties<\/h3>\n
Packaging<\/h3>\n
Implementation<\/h2>\n
Substrate and substrate preparation<\/h3>\n
Application conditions<\/h3>\n
Application material<\/h3>\n
Application method<\/h3>\n
Consumption<\/h3>\n
Drying time at 20\u00b0C and 60% relative humidity<\/h3>\n
Tool cleaning<\/h3>\n
Technical specifications and performance<\/h2>\n
Product appearance<\/h3>\n
Storage and safety<\/h3>\n
Presentation<\/h2>\n
AREAS OF USE<\/h3>\n
COMPOSITION<\/h3>\n
FINISHES<\/h3>\n
PROPERTIES<\/h3>\n
PACKAGING<\/h3>\n
Implementation<\/h2>\n
SUBSTRATE AND SUBSTRATE PREPARATION<\/h3>\n
PREPARATION<\/h3>\n
APPLICATION EQUIPMENT<\/h3>\n
CONDITIONS OF APPLICATION<\/h3>\n
Implementation<\/h2>\n
APPLICATION METHOD<\/h3>\n
CONSUMPTION<\/h3>\n
TOOL CLEANING<\/h3>\n
Technical specifications and performance<\/h2>\n
PRODUCT APPEARANCE<\/h3>\n
DENSITY A + B (AT 20\u00b0C)<\/h3>\n
SPOTLIGHT<\/h3>\n
USEFUL LIFE<\/h3>\n
PRECAUTIONS FOR USE<\/h3>\n
MAINTENANCE<\/h3>\n
STORAGE<\/h3>\n
SAFETY<\/h3>\n
Presentation<\/h2>\n
Areas of use<\/h3>\n
Composition<\/h3>\n
Properties<\/h3>\n
Packaging<\/h3>\n
Implementation<\/h2>\n
Substrate and substrate preparation<\/h3>\n
Application conditions<\/h3>\n
Application material<\/h3>\n
Application method<\/h3>\n
Consumption<\/h3>\n
Tool cleaning<\/h3>\n
Technical specifications and performance<\/h2>\n
Product appearance<\/h3>\n
Density A+B (at 20\u00b0C)<\/h3>\n
Precautions for use<\/h3>\n
Applying varnish to Marius Aurenti waxed micro concrete<\/h2>\n
What are the key points for applying varnish correctly?<\/h2>\n
\n\t\t\t\t\t\t\t\t\t\t\t\t1\/ Matt, satin or gloss varnish?<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\t2\/ How do I choose the right nail polish from the Marius Aurenti range?<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\t3\/ How much varnish should I use?<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\t4\/ Good site conditions<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\t5\/ Preparing the varnish<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\t6\/ Applying varnish<\/a>
\n\t\t\t\t\t<\/h3>\n\n\t\t\t\t\t\t\t\t\t\t\t\t7\/ Varnishes tested and approved for over 35 years<\/a>
\n\t\t\t\t\t<\/h3>\n