Concrete, lime or marmorino wax,
for floors and walls

HIGH RESISTANCE WAX Finish Edition of 01/03/2023 Presentation AREAS OF USE The product is used for interior treatment of porous mineral materials for surface hardening and protection. COMPOSITION High-resistance emulsion, available in 3 grades: gloss, satin or matte. In addition to the topcoat, it protects surfaces against micro-scratches and reinforces them against punching. Properties High strength, fast drying, slip resistance, easy to apply and maintain, good UV resistance, good traffic resistance. Packaging 1 L and 5 L Implementation SUBSTRATE AND SUBSTRATE PREPARATION The substrate must be clean and dry. Old protective waxes will be stripped off. Two types of application are possible: using an applicator broom or, ideally, a single-brush machine. CONSUMPTION 20 to 30 m2/L/coat METHOD OF APPLICATION Broom application Apply a thin, even coat of high-strength wax. Apply in overlapping strips while the wax is still wet. Allow to dry thoroughly (approx. 30 minutes). Apply the second and subsequent coats, taking care to criss-cross (2 to 3 coats are recommended). Single-brush renewal The product is sprayed on and applied with a single-brush machine fitted with a white pad. Wax renewal is based on intensity of use. Maintenance: wash the floor regularly with a neutral detergent from the Ma’s range. Important: do not dilute or mix with other products. Do not apply over any other type of wax. Do not use outdoors or in damp areas. Do not apply if temperature is below 5°C or above 35°C. TOOL CLEANING Equipment should be cleaned with water after use. Technical specifications and performance 4 PRODUCT APPEARANCE White opaque liquid APPEARANCE OF DRY FILM Gloss / satin / matt depending on reference DENSITY 1.03. PH 8,4 à 9,2 STORAGE AND SAFETY 1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +5° and 35°C. For further safety information, please consult the Safety Data Sheet.

Wall wax paste, finishing Technical data Edition of 02/12/19 Presentation Ready-to-use, creamy wall wax paste for interior wall decoration based on lime paste. Implementation The surface must be perfectly clean and dry. Apply 1 to 2 coats with a sheepskin glove, depending on the desired effect. Apply in overlapping strips while still damp. Wait for the wax to dry (4 to 5 hours at 20°C), before applying the next coat. Wall wax paste can alter colors, so a test run is always recommended. Important: Do not dilute or mix with other products. Do not apply over any other type of wax. Do not use outdoors or in damp areas. Do not apply if temperature is below 5°C or above 35°C. Features Product appearance pasty, cream-colored with iridescent highlights Dry film appearance silky matte with effects Packaging 650 g or 3.5 kg Precautions for use In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children. Use gloves. Keep in original packaging and store in a dry place at a temperature between 5 and 30’C. All information presented in this data sheet is provided for information purposes only and does not engage our responsibility. Testing is necessary.

Edition of 01/03/2023 Presentation AREAS OF USE Wall wax for Lime paste or Marmorino. COMPOSITION Mixture of synthetic resins and wax in emulsion. PROPERTIES Single-component, ready-to-use, waterproofing. PACKAGING 1L – 5L Implementation SUBSTRATE AND SUBSTRATE PREPARATION The substrate must be sound, dry, cohesive and clean (free of dust, dirt, oil, etc.). APPLICATION EQUIPMENT Smoother or 12mm roller. CONDITIONS OF APPLICATION TEMPERATURE: >5°C and <30°C (ideal temperature: >15°C and <20°C) RELATIVE HUMIDITY: <60% IMPLEMENTATION When the lime is completely dry and has completed its carbonation process, apply a coat of wax using a smoother or roller. Always apply from bottom to top with the smoother. Do not overthick wax to avoid white areas. When the surface begins to dry, smooth out for greater effect. Important: Do not dilute or mix with other products. Do not apply over any other type of wax. CONSUMPTION 70 – 100mL /m² TOOL CLEANING Equipment should be cleaned with hot water after use. Technical specifications and performance VISCOSITY 40 cPs SPOTLIGHT > 60°C PRODUCT APPEARANCE White creamy fluid APPLIED, DRY APPEARANCE Mat SPECULAR GLOSS AT 60°. Mat: approx. 3UB These data are indicative and may vary according to application conditions. DENSITY (AT 20°C) 0,95 STORAGE AND SAFETY 1 year in original, unopened packaging, out of direct sunlight and frost, at temperatures between +5° and 35°C. For further safety information, please consult the Safety Data Sheet. Warning Designed, developed and manufactured in Europe. All data presented in this Technical Data Sheet are provided for information purposes only and do not engage our responsibility. Under no circumstances should they be construed as a warranty. Testing is necessary. This data sheet is subject to change, so please check that it is the latest edition. This data sheet cancels and replaces all previous versions. Furthermore, as the application and conditions of use are not under our control, we decline all responsibility. For further information on precautions for use and safety instructions, please contact our Marius Aurenti teams.